The Operation Process of Flat Screen Printer

hot air stenter, flat screen printing machine


As we all know, the Flat Screen  Printer is a machine that uses a flat screen version and prints on a  flat substrate, generally, the squeegee of which presses the plate horizontally  and the machine changes the substrate through the plate. However, for many new  customers, though we purchase it, we do not know how to use it. Now, I would  like to introduce the operation process to you.

In the process of using the machine, we need to be careful to avoid  mechanical damage and electric shock all the time. The operation process is as  follows:

1. Clean the Flat Screen Printing Machine and workplace. Don’t  place any objects on the worktable.

2. Check the screen version, and the four corners of the screen frame and the  surrounding of the picture are sealed with a side back adhesive to avoid leakage  during printing.

3. Prepare and set up fixtures according to product process requirements and  technical specifications to confirm silk-screen.

4. Fix the frame on the clamp and adjust the distance between the substrate  and the screen. The mesh distance is 4~10mm, depending on the size of the  frame.

5. Lift the screen and place the substrate in the center of the table,  roughly align with the printed pattern. Position with self-adhesive. Height of  positioning should be the same as that of substrate.

6. Regarding the position where the scraper is paused back and forth, the  screen on the back must be taped to avoid scratching the mesh.

7. When the plate of the screen printer is adjusted, we are supposed to pay  attention to check the printing table. There should be no items such as tape on  the screen so as to avoid deformation and damage of the net frame when the  screen is pressed down.

8. If the machine needs to stop urgently during operation, the front safety  platen.

9.In case of machine failure, the power should be cut off immediately.

In order to avoid risks, we also need to pay attention to the following  issues:

1. The operator must pass the training;

2. The PE wire of the equipment is grounded;

3. We must use a safe voltage of lighting ;

4. The equipment should be regularly maintained and overhauled. Click  hotairstenter.com for further more information.

What's Your Reaction?

Cry Cry
0
Cry
Cute Cute
0
Cute
Damn Damn
0
Damn
Dislike Dislike
0
Dislike
Like Like
0
Like
Lol Lol
0
Lol
Love Love
0
Love
Win Win
0
Win
WTF WTF
0
WTF
hate hate
0
hate
fun fun
0
fun

Comments 0

Your email address will not be published. Required fields are marked *

Choose A Format
Story
Formatted Text with Embeds and Visuals
Poll
Voting to make decisions or determine opinions
Trivia quiz
Series of questions with right and wrong answers that intends to check knowledge
Personality quiz
Series of questions that intends to reveal something about the personality
Image
Photo or GIF
Video
Youtube, Vimeo or Vine Embeds
List
The Classic Internet Listicles
Countdown
The Classic Internet Countdowns
Open List
Submit your own item and vote up for the best submission
Ranked List
Upvote or downvote to decide the best list item
Meme
Upload your own images to make custom memes
Audio
Soundcloud or Mixcloud Embeds
Gif
GIF format